HOOKER up n GITERDUNN with a HOOKER HITCH

Proudly Made in the USA

 

DSCF5375.JPG

Buy it Now - Adjustable Foot / Dead Man Throttle @ $55.00

Hooker Hitch Adjustable Foot / Dead Man Throttle

Mod.CT0101  shown above $55.00 free shipping to the lower 48 United States of AMERICA. 

IN STOCK FOR IMMEDIATE SHIPPING

  • Fits all wide frame and some spread frame Cub Cadet pulling tractors.  
  • CNC Machined from 6061 Aluminum.  
  • Glass smooth movement, Stainless Steel shaft on nylon bushings. 
  • Fully adjustable, approx. 4" of pedal movement can give you anywhere from 1/4"- 1" of cable movement. 
  • Foot pedal can be set in 1 of 4 different holes for any size foot.
  • Foot pedal can be adjusted as high or as low to the running board as you would like.

                                   Continued ---------

 

DSCF5363.JPG

CT0101 Throttle pedal continued ------------ 

  • New easier single wrench/socket clamping of arm.
  • All adjustments hidden inside frame for a clean look.
  • Mounts in the existing 1" hole in your frame (where your lift handle was) .  
  • 44" of Nylon coated aircraft cable (no more annoying frayed ends).
  • 36" of 5MM nylon lined cable housing (black).
  • Stainless steel & plated steel hardware.   
  • Zink plated steel spring.  
  • Steel mounting hex nut.
  • Plain 1/16" cable on the carb / governor end.
  • Easy installation, no drilling or machining required.
  • Illustrated assembly and adjustment instructions included. 

If you are tired of sticky foot throttles that only move 1" from idle to wide open then this is what you need.

 

E0202.JPG

Buy it Now - Basic Profile Model E0202 @ $115.00

Basic Profile Model E0202 shown above $115.00 free shipping to the lower 48 United States of AMERICA.

Fits newer Cub Cadets with 9 bolt differential cover.

OUT OF STOCK

 

DOVETAILSLIDE.JPG

U0101.JPG

Buy it Now - Universal Model U0101 @ $70.00

Universal Model U0101 shown above $70.00 free shipping to the lower 48 United States of AMERICA.

3/4" X 4" X 9" mild steel plate can be welded to just about any tractor, or drill your own mounting holes and bolt it on.

In Stock for Immediate shipment

 

Hooker Hitch adjustable competitive garden tractor pulling hitches.

  •  Innovative adjustment mechanism utilizing 1 set screw and a dovetail slide for ROCK SOLID 3 point contact locking.
  • Lock pad protects slide from set screw damage.
  • Full range of adjustment can be achieved in seconds with a 1/4" allen wrench.
  • Forged steel drawbar eye with 1 1/2" hole and 1/2" thickness meets NQS and most all other club rules.
  • All necessary hardware included.
  • The above features apply to all of our HOOKER HITCH Drawbars / Hitches.
  • All Cub Cadet models replace existing differential cover.
  • Universal Hitch U0101 shown above. 

 

 

wheeliebarsright.JPG

Heavy Hooker Hitch Model HH0211 $150.00 + actual shipping.

OUT OF STOCK

Request a shipping quote.

 This hitch will add approx. 50 lb. to the back of your Cub Cadet where you need it most.

Will fit narrow frame, wide frame, and spread frame Cub Cadet models with 7 bolts.

Can also be made to fit the newer cub rears with 9 bolts, Not stocked Made to order (approx. 2-4 weeks)

Shown with our adjustable wheelie bars and wheels, not included.

___________________________________________________

 

PH0101.JPG

Buy it Now - Pro Hooker Model PH0102 @ $240.00

ALL NEW Pro Hooker Model PH0102 shown above.

  • Professional grade adjustable garden tractor pulling draw-bar.
  • Sets your hook point closer to the axle than previously possible.
  • Only 7/8" from gasket surface to hook point.
  • CNC machined from steel billet.
  • Heat treated steel hitching device.
  • Hitching devise is just under 3/4" thick both ways.
  • 1.50" Dia. clearance in front of hook point.
  • Single screw locking for quick easy adjustment.
  • Dovetail slide for rock solid locking.
  • Mounting screws included.
  • Approx. 15 lbs. total weight.
  • Meets NQS requirements.

 $240.00 free shipping to the lower 48 United States of AMERICA.

OUT OF STOCK

E0201.JPG

Buy it Now - Basic Profile Model E0201 @ $110.00

Basic Profile Model E0201 shown above $110.00 free shipping to the lower 48 United States of AMERICA.

Keep that distinct Cub Cadet cover shape while upgrading to a fully adjustable garden tractor pulling drawbar.

                                           IN STOCK FOR IMMEDIATE SHIPPING

 

HOOKER HITCH STARTER KITS

IN STOCK FOR IMMEDIATE SHIPPING

Kit 101 - E0201 Basic Profile Hitch and WB0202 Wheelie Bar
(K101) $194.00

Kit 102 - E0201 Basic Profile & CT0101 Dead Man Throttle
(K102) $157.00

Kit 103 - E0201 Basic Profile Hitch, CT0101 Throttle, & WB0202 Wheelie Bars
(K103) $240.00

Kit 104 - WB0202 Wheelie Bars & CT0101 Dead Man Throttle
(K104) $146.00

Add a kill switch to any order for just $10.00

CH0101
CH0101

Buy it Now - Spread Frame Clutch Hanger @ $75.00

 

Heavy Duty Clutch Arm Hanger Designed to fit Cub Cadet Spread Frames

Model CH0101  shown above $75.00 free shipping to the lower 48 United States of AMERICA.

IN STOCK FOR IMMEDIATE SHIPPING

  • This is one of the pieces you need when converting from hydro to gear drive for pulling.
  • Fits all Spread Frame Cub Cadet 82 series pulling tractors.
  • Laser cut from 1/4" thick plate.
  • Precision formed for rigid triangulated design.
  • Welded on a precision machined fixture for consistent direct bolt on fit.  
  • 4 Slotted mounting holes for left to right adjustment. 
  • Mounts with all 4 existing dash tower mounting holes to distribute the load more evenly onto the frame. 
  • 4 mounting bolts with hardened washers included. 
  • 1 hardened 3/8" shoulder bolt with nylon lock nut for pivot shaft.
  • 2 pivot holes to match 2 different Cub locations.
  • Easy installation, no drilling or machining required, just clean, paint, and install.

   
   
   

cubwheeliebars.JPG

Cub Cadet Wheelie Bars by Hooker Hitch Model WB0202 

$99.00 free shipping to the lower 48 United States of AMERICA

IN STOCK FOR IMMEDIATE SHIPPING

Mounts to each axle housing with 2 bolts in existing holes.

These are Heavy Duty laser cut from 3/8" thick steel, no cross brace needed.

Slotted for fine adjustment to the most radical chassis and tire combination.

All hardware and 5" dia. wheels included.

Also available without wheels and axle bolts Model WB0202LW

$79.00 free shipping to the lower 48 United States of AMERICA

killswitch.JPG

Buy it Now - 1 Kill Switch @ $15.00

Buy it Now - 2 Kill Switches @ $28.00

 

Garden tractor pulling kill switch

Grounding type will work for Magneto or Battery type Ignition

Instructions included for Battery Ignition (Cub Cadet)

$15.00 ea. free shipping to continental USA *

2 Switches $28.00 free shipping to continental USA *

$10.00 ea. with purchase of hitch or wheelie bars (must be shipped with hitch or W.B., limit 2 switches per hitch or W.B. purchase)

* Excludes Hawaii, Alaska, and Puerto Rico.